BMW ZF 5HP19 preliminary Valve body Information.
if you repair or like to rebuilt your valve body this is the manual you need for the BMW from 97 up.
3 series E46, 5 series E39, 7 series E38
Audi 95 to current, A4, A8 97-- A6
Porsche Boxter 1996--97
VW Passat 96---
See to Figure 2 for Clutch and Band Application Chart.
Refer to Figure 3 and 4 for Manual Shift Lever Operation, and Failsafe Operation.
check to Figures 5, 6, and 7 for Solenoid identification and both MV Solenoid Operation and EDS
Solenoid Operation and Tests.
Refer to Figure 8 for wiring harness identification, internal wiring schematic, and transmission case
connector pin identification and functions.
Refer to Figure 9 for Shift Solenoid Application chart. Notice that EDS 1 Solenoid is used for line
pressure control, and MV-4 is used for converter clutch.
Refer to Figure 10 for internal components resistance chart, with the pins identified for both the
transmission case connector and the Electronic Control Unit.
Refer to Figure 11 for Upper Front Valve Body exploded view and identification of valves.
Refer to Figure 12 for Upper Rear Valve Body exploded view and identification of valves.
Refer to Figure 13 for Lower Front Valve Body exploded view and identification of valves.
Refer to Figure 14 for Lower Rear Valve Body exploded view and identification of valves.
Refer to Figure 15 for Channel Plate exploded view and turbine speed sensor location on the channel
plate.
Refer to Figures 16, 17, and 18 for valve body retainer locations in the various valve bodies.
Refer to Figure 19 for the locations of the orifices, check balls, screens, and the check valves and
springs that are located in the channel plate.
